Originally Posted by groop
Tink, I've got my centerstand off now and doing some welding/repair work and I'm thinking of doing the flat bar stock arm that your welder did. I like the look. Now that you have the pipes and kick stand back on, have you noticed any issues with clearance?
The only caveat is that I removed the original BMW side stand and I'm only using the aftermarket Brown side stand. The tab "could" interfear with a BMW side stand, I did not check for this clearance on mine.
Looking at this old photo when I still had the BMW side stand on the bike I would have to say the new tab location I chose would most likely interfear with an OEM BMW side stand.
better photo, with text...