View Single Post
01-26-2013, 05:45 PM
OUTLAW POSTIE 001
Joined: Feb 2009
Location: goodly satisfactory place, qld
Originally Posted by
Has anyone been able to determine what was added to the TE630 45mm front fork to shorten the total range of compression and ride height from the TE610? My assumption is that there is a spacer somewhere in the 630 fork that is not in the 610.
Here are links to the shop manuals with a schematic of the 45MM forks and I can not determine where there is a difference..
i have shortened conventional forks by placing a spacer on the damper tube .It pulls the damper/topout spring down.Without pulling a set of 630 forks apart it would have to on the damper or a shorter damper tube is used on the 630
out riding bored and stroked posties....braaaaaaaaaap
View Public Profile
Find More Posts by WILL_S