Negligible voltage coming off of the blue wire from the part where the red MM lead is touching (solenoid?)
In the picture I am checking voltage off of one of the big wires (this left goes to the POS battery term, the right I think goes to the starter). I'm showing 12 volts with on the left term and none on the right. When starter is engaged the voltage drops to about 9 for both big terminals. The blue wire continually shows negligible voltage ~.05 .10v.
I tested resistance on the coil wires using the 200 setting. This time I get ~.20 from blue-white to ground, and still 1._____ from plug wire to blue-white.
Anyone know what voltage
I should expect to see on the blue wire coming off the relay? Seems like I should see more than .05-.10v To be clear - the voltage on that blue wire (which routes to the coil) does not change when the starter is engaged.