View Single Post
Old 01-27-2013, 07:59 PM   #2703
MentalGuru
Crazy Diamond
 
MentalGuru's Avatar
 
Joined: Aug 2011
Location: Mental Ward
Oddometer: 726
Quote:
Originally Posted by Ed@Ford View Post
There was some previous discussion on it being a no-no to adjust the "sealed" throttle stop on the throttle body. I asked the stupid question of whether there is an adjuster on the throttle cable by the RH grip. Well, I looked at the bike show yes...there is one on the CRF. Here's an experiment for someone who has a CRF in a warm area that likes to stall when the throttle is allowed to slam shut and the bike rolls to a stop. Fiddle with the adjuster on the cable to the point where the idle is slightly elevated....go out and see if the bike still stalls. If it no longer stalls, then "idle speed setting" via the throttle stop is a fix of sorts. But I think thoroughly studying the service manual is essential. Mine's on order...when it arrives? Who knows!

Be careful when you do this because dirt could cause the throttle to stick further open since it won't have any slack.

MentalGuru is offline   Reply With Quote