View Single Post
Old 01-27-2013, 08:50 PM   #22
Mudguts
when in doubt GAS IT
 
Mudguts's Avatar
 
Joined: Jan 2006
Location: Some were in , lostralia
Oddometer: 2,016
Test data for crf 450 2005

Tested Plug on other motor which is oke.

-----------------------------
Tested: peak voltage on the ignition coil should be 100 volts minimum.
My measerement after kick starting = 0 Volts.

Resistance measurement Ohm at 20 degrees celsius should be 0,1 - 0,3 Ohm

-----------------------------

Tested: exiter coil peak voltage should be 50 volts minimum (blue terminal + white

Resistance measurement Ohm at 20 degrees celsius should be 9 - 25 Ohm




-----------------------------

Tested: peak voltage on the ignition pulse generator should be 0,7 volts minimum.


Resistance measurement Ohm at 20 degrees celsius should be 180 - 280 Ohm



-----------------------------


Tested: coil resistance with cap removed should be 4 - 8 K Ohm at 20c
Regards,
Mudguts is offline   Reply With Quote