View Single Post
Old 01-30-2013, 07:51 AM   #3400
Aquatic
Beastly Adventurer
 
Aquatic's Avatar
 
Joined: Dec 2008
Location: Buddina, Sunny Coast, Australia
Oddometer: 1,516
Ignition Mount

With the help of WayneC1 I am coming up with a Ignition mount for the YZ conversion.

I have the Dakar top clamp roughly modelled up
I have Wayne's Ignition mount for a TT/WP top clamp modelled up

Next is the YZ top clamp which will have to be a little more precise.

I also want to make up a totally new hybrid top clamp that will be a straight fit for a YZ lower Clamp and a Dakar frame. As well as a top and bottom clamp with spindle set.

I also would like to add an optional damper mount. Any advice on what would be the best(read most common) mounting hole pattern to use?

Have a look here

https://www.dropbox.com/sh/vf42u44z73izub9/TWvmmbZ0u_
(click on a file an then download top right)

Please, any suggestions would be good.

Also in the folder is the "in progress" 3D model of my 2001 Dakar. Wudyafink?
Aquatic is offline   Reply With Quote