[LaurelPerryOnLand]

Originally Posted by dsy

Made an oil cooler guard out of some scrap perforated aluminum I had laying around. The holes are 1/4", will keep an eye on the temp indicator
for awhile to make sure its getting enough air flow. Was easy to put together. Used a piece of cardboard to trace and
cut out the shape, then put the bend to be able to bolt through the cross brace with button head stainless hardware.
Used a piece of automotive door edge guard to dress up the edges so they don’t scratch up the paint. Should be pretty impact
resistant.
Doug

Beautifully crafted!