Originally Posted by Supahflid
Why can't I keep the SAS turned off? Under the map edit tab I can right click and disable the SAI, then I do a fifteen minute idle, but it won't stop throwing the error code.
Also, under the Test and Adjust tab, why doesn't clicking any of the items on the left hand side do anything?
When you modify the map in the computer, like turning the SAI off, you must write the map to the ECU on the bike, then do the 15 minute idle.
If the Test and Adjust is dim or off, check that you are connected to the bike's ECU. You should see a green light in the lower RH corner of the computer screen.