Originally Posted by AntonLargiader
What's the extra nut supposed to be for? Normally you just have one squeezing the split washer and then the nut/plate with the nut facing out.
The extra nut is oversized (doesn't thread to bolt, slip on) and machined to float on the washer. I got the first kit in the 'new style' but the tube was a bit short. Dan is sending me the fix. Single nut will not bite with new pieces.
There is a pleasure in the pathed woods, There is a rapture in the smoking pipe, There is chaos, where none intrudes, in the deep dell, with its thrills roar; I love not nature less, but bikes the more. Byron riding.
All pics < 6/30/12 deleted by Apple
Now with SmugMug supporting ADV
Sutherngintelmen screwed with this post 02-01-2013 at 06:26 PM