The cooler is tilted back towards the tank slightly.
Dont take this as an expert set up or that i know what i am doing!:what:
I know it is not in direct air flow but it will deff. Get some flow. Thinking more of the heat radiation which is when these bikes get hot at low speed hard riding. I do have a thermo dipstick so i can monitor temps.
It would be easy to tap into a line to put a tto gauge later also.
This whole set up was less then $50 doing it all myself.
A welder, 4in cutoff wheel and 4in flap disk sander wheel for a small angle grinder.
The paint was called noble shelter paint that seems to match the stock frame when new.