View Single Post
Old 02-02-2013, 05:52 AM   #1644
blacktiger
Tigers R great.
 
blacktiger's Avatar
 
Joined: Nov 2005
Location: St.Leonards on Sea, England.
Oddometer: 3,522
Quote:
Originally Posted by jphish View Post
Blacktiger - I am caught in the "Bark Buster back order" group. I went with that particular brand because they will work with a Kaoko throttle control. (Kaoko is GREAT to work with!) So Question: 1) Do you think 1050 hand guards would work with a Kaoko? 2) do you have a pic of handguards you can post (or send email via smartphone) so I can see how they mount? Thanks in advance for advice / Assistance. TTFN, j
Oh crickey! I have no idea about the Kaoko thingy so I can't comment about that. All I can say is that the 1050 hand guards, once you bought the whole kit, are pretty much a direct bolt on replacement for the OE XC guards.

http://www.worldoftriumph.com/triump...lock_03=233186
As opposed to
http://www.worldoftriumph.com/triump...lock_03=560041

So you've got brackets that use the pivot bolt on the levers. Then they bolt into the end of the bars. It really is that simple.
I don't really have any photos of when I put them onto the standard XC bars other than from the front.


This is from when I'd just finished installing the Renthal bars. I had unique spacers made to suit the handle bar ends.


This one is when I had the Renthals and the 1050 guards on my Scrambler. You can just see that there's two bolts onto the inner bracket which is, I believe, what give the whole assembly better stability. It's what the XC guards are lacking. You can also see that the guards are about 5mm thick. The molded in rib around the middle also adds strength.



That's the best I can do at present.
__________________
2002 black Tiger955i, 72000 miles and counting.
2012 black Tiger800XC, 32000 miles and counting.

blacktiger screwed with this post 02-02-2013 at 06:03 AM
blacktiger is offline   Reply With Quote