View Single Post
Old 02-02-2013, 09:25 AM   #73555
procycle
Beastly Adventurer
 
procycle's Avatar
 
Joined: Jun 2007
Location: Center of the DR650 universe
Oddometer: 2,137
Quote:
Originally Posted by acesandeights View Post
The manual says it shortens the overall length, not just the travel. So you get 1.6" of ride height difference just between the two holes? The two holes are only about 5/8" apart. So, where's the other 1" come from? Not arguing here, just trying to learn. Holding the parts in my hands and looking at them, it looks like you'd limit travel and length by flipping the spring seat.
The amount it's lowered is measured at the rear axle so the length of the swingarm is where most of the additional inch comes from. Also there is the geometry of the shock linkage.

Flipping the stock spring seat only limits the travel but does also move the location of the spring on the shock body.
__________________
Clarke's second law of Egodynamics: "For every expert, there is an equal and opposite expert." - Jasper Fforde
www.procycle.us - Everything for your DR650 and lots of other great stuff!
DR900 Big Bore Stroker buildup
TurboDiesel Corvette - go to the end to start at the beginning
procycle is offline   Reply With Quote