View Single Post
Old 02-03-2013, 05:25 AM   #4969
Grinnin
Forever N00b
 
Joined: Dec 2005
Location: Maine
Oddometer: 2,462
Quote:
Originally Posted by Croissant Warrior View Post
If I disconnect the wire from the gear box and short it to the frame, the light comes on. And to make sure I am not stupid, I did rotate the rear wheel to make sure I was in Neutral.

Looking in Google, can't find anything in reference to replacing a Neutral switch inside the gearbox...

Tx for any tips
Sometimes a switch will get "fussy" and only light up when the selector is centered in neutral. But it sounds like this is not a single instance, but a total failure.

The neutral switch simply unscrews from the case. After you get it out, test the switch itself to see if the problem is the switch contact or the switch "button" not being pushed far enough.

If you clean enough chain lube out of there, you'll probably see clearly how to get it out.
__________________
Motorcycles are magical.

Grinnin is offline   Reply With Quote