These have been a long time coming but we are happy to release our new range of parts for the awesome Triumph Tiger 800 and 800 XC.
As with our much loved parts for the BMW F800GS
, KTM 950/990 Adventure
, KTM 690 Enduro
and Yamaha XT660z
Tenere, this range is all hand made by craftsmen in the North of England. If you are not familiar with our parts, a quick read through the F800GS and KTM 690 threads linked above should give you an idea of their quality.
So without further ado....
- approx $300US
At Adventure-Spec we believe the most important additions to a bike are those that let you go beyond the 'safe' routes without worrying about terminally damaging your means of exploration, ie you or your bike.
Our new range of parts for Triumph's Tiger 800 and 800XC have been designed and manufactured with this principle as the primary focus.
Manufactured by CNC tube bending machines using a non-standard high tensile steel we are able to keep the seam running along the inside edge of the bars increasing strength dramatically over standard bent tube.
Completed with our usual high standard of TIG welding (unlike other inferior MIG welded products) and then triple powder coated for superb corrosion resistance these bars not only complement your bike but provide tough expedition tested protection.
We doubt you will find any better.
- approx $235US
A 4mm thick Adventure-Spec sumpguard. Designed for offroad and adventure use this guard is made with the same attention to detail and quality material as all Adventure-Spec products.
- approx $85US
Adventure-Spec's rear luggage plate provides a sturdy platform to attach all manner of bags and luggage to.
With a generous complement of slots and holes it can accommodate all types of straps, bungees, webbing, ratchets etc. The side slots are parallel to work better with wide straps and allow tighter fastening.
All slots and holes have fully chamfered edges to prevent damage to straps and luggage. The whole plate is deburred and has smoothed edges for further slash protection
The rack is supplied with machined and annodized spacers to allow straps to easily pass beneath the plate.
Side Stand Big Foot:
- approx $40US
Motorcycle side stands are often no use on soft ground or sand. The stand just sinks into the ground under the bikes weight and the bike topples over. Not good.
This side stand fat foot increases the surface area on the stands base, preventing it from sinking into the ground and keeping the bike upright.
It also looks great with laser etched Adventure-Spec logo.
- approx $60US
For the shorter in the leg rider the towering seat height of most Adventure and Dual Sport bikes can make them extremely difficult to ride, particularly low speed manouvering.
These lowering links (25mm or 35mm), in combination with the Tiger's adjustable seat height, offer enough droop for most riders. To keep the steering geometry consistent push the forks up through the yokes a similar amount to the drop offered by the links.
Thats all for now, but we have put together a bundle that saves big on these parts and more from other manufacturers for the Tiger 800
We've have been shipping our parts around the world daily since 2008 so you can be confident the ordering procedure should be painless. Due to our direct sales model we can offer a very high quality product at reasonable prices.
The parts are all in the warehouse apart from the first production crashbars which are coming in from the finishers tonight.
All the images above link to the products on our website, where there are many more images and more details.
Ask us any questions here and we will do our best to get you an answer.
What do you think?