View Single Post
Old 02-05-2013, 07:12 AM   #23
Goggles Pizano
I'll B right back,promise
Joined: Aug 2008
Location: Reno
Oddometer: 218

Hey Andi, Scott in Reno here. I'm sure others will chime in but, an old motocross trick for a leaky seal was to put some rubbing alcohol in thru the bleeder. The rubber should swell slightly and reduce the leakage. I would suspect that 1 oz would be plenty.. give it some thought.

good luck,
following along

Goggles Pizano is offline   Reply With Quote