View Single Post
Old 02-05-2013, 09:29 PM   #2402
doc_ricketts
Thumper jockey
 
doc_ricketts's Avatar
 
Joined: Jul 2007
Location: FlaWaCo?
Oddometer: 4,740
Quote:
Originally Posted by Bigfeet428 View Post
Go over to http://www.rimfirecentral.com/forums/ and take a look around. Dropping the trigger pull on a 10/22 can be a simple as replacing the hammer in the trigger group as is well within the abilities of a do it yourselfer. Great bunch of folks that are always willing to help.
I did the triggers on both my 10/22s and got them real smooth and down to about 1.5 lbs very easily. Just takes a little time, some emery cloth and a fine little flat file (1/4" wide). They shoot much better for me and both triggers are matched to make transition from one to the other invisible to the finger. You really don't need to spend money on aftermarket triggers.
__________________
"Get yourself to the hills and be uplifted, assuming you got some good knobbies"
doc_ricketts is offline   Reply With Quote