View Single Post
Old 02-06-2013, 06:21 AM   #4
Kool Aid poisoner
Albie's Avatar
Joined: Mar 2004
Location: NWA
Oddometer: 9,941
Originally Posted by fergy2106 View Post
Hello all, new to the site. I am wanting a set of road wheels for my 2012 690 enduro r. Can anyone advise if a set of : -


will work on this model or do i require the SMC\SMCR wheels from a similar year?

I was advised that the SMC has the axle directly in the centre of the bottom of the forks and the enduro R has them off center towards the front. Can anyone confirm this and if it poses a problem for the conversion? I have read the articles on the conversion but i believe it was on the older model enduro. Has anyone done the conversion on a 2012 enduro? I seen a set of BST wheels for the job going at about 2700! Feck that!

Any assistance would be appreciated.

Oh, if anyone wants an MT500, gimmie a shout
The off set axle location is not a problem. There's no difference in ANY of the years including yours as far as fit goes.
Good. Bad. I'm the guy with the gun.

Another day, another foot injury!
Albie is online now   Reply With Quote