Originally Posted by mendoteach
Does somebody know a good, fairly low profile, LED blinker? I ordered some cheap ones from ebay and they are CHEAP! The wires are about 32 gauge and they pull out of the body easily. I don't mind paying if they are bright and tough.
I made these from 18 wheeler LED clearance lights. Get them at trailer supply or truck stop. The mounts are cut from 1" rubber sheet ( pc. on fender lower photo ).
They are adequate. I would not call them overly bright in daylight conditions. They are fine in all other lighting conditions. You will need a solid state flasher relay and diodes at the dash light with LED lights.