View Single Post
Old 02-12-2013, 09:37 AM   #11
Kool Aid poisoner
Albie's Avatar
Joined: Mar 2004
Location: NWA
Oddometer: 9,963
Originally Posted by r'elise me View Post
Thought it worth reviving this thread to ask if there are any tricks to removing the bushing without removing the seal and vice versa. I'm kind of worried about scratching the case when I yank on the seal with an awl. I'm thinking it would be easier to pull the seal after pulling the bushing, but not sure if that's possible.

BTW, I see Moose Racing sells a complete kit. Anyone have experience with that kit? I like their bearings and steel-sleeved front wheel spacers better than OEM, but wondering if OEM is better in for the countershaft seals.

The bushing should just pull right out then fish out the o-ring with a pick. I've used a sheet metal screw to remove the seal, just screw it in and yank it out with a pair of pliers.

Haven't tried the MR kit but I have tried the All Balls one and that kit works fine.
Good. Bad. I'm the guy with the gun.

Another day, another foot injury!
Albie is online now   Reply With Quote