View Single Post
Old 02-12-2013, 11:05 AM   #30
ME 109
Beastly Adventurer
 
ME 109's Avatar
 
Joined: Jun 2009
Location: Albury Australia
Oddometer: 2,003
When I repaired my stand, I welded to increase the width of the stand contact point, from about 5mm to 8mm.
This assists in slowing the wear of the stand contact point.
The weld is built up towards the inside of the stand.
By placing the bike up on 3" blocks of wood, the c/stand can be easily installed and removed to grind the contact points equally.
The finished grind should have the stand at an angle which is getting close to.....well, falling forward off the stand, but not too close!
My stand is an excellent bmw ride off stand now, fantastic when fully loaded for touring.







__________________
Lord of the Bings

ME 109 screwed with this post 02-12-2013 at 11:09 AM Reason: photo added
ME 109 is offline   Reply With Quote