View Single Post
Old 02-17-2013, 06:22 PM   #155
Beastly Adventurer
Kommando's Avatar
Joined: Nov 2006
Location: Spacecoaster FL
Oddometer: 7,389
Originally Posted by VooDooDaddy View Post
Simply cut the female end off the lead in the picture, solder the power wire from your accessory outlet you bought to the black/white wire in your picture, and then solder in the ground wire from the accessory outlet to the brown/ground wire.

Easy, peazy, Japanezzy.
They could also cut that female plug off and attach those wires to a power distribution block's input ports. Then they could attach their accessory-plug wires to one of the sets of output ports. Any other low-amperage switched items they want to power could be wired from this distribution block.

I'd check the amperage rating for that plug's circuit before wiring in a bunch of stuff though.
Kommando is online now   Reply With Quote