View Single Post
Old 02-18-2013, 09:26 PM   #22920
tdreyer
KTiM
 
tdreyer's Avatar
 
Joined: Mar 2008
Location: Used to live in Crestview FL, now ????
Oddometer: 498
Quote:
Originally Posted by Just_P_Dirty View Post
1 ride and bike is down again. i think i blew the front sprocket seal. the sprocket nut came loose. i pulled the cover off and it fell on the ground. good thing it still cold out.
Can you carefully try to see what shape the o-ring is in? If it was just loose and didn't damage the o-ring, you should be able to put it back together and tighten it back up. Let me know what you find. I probably have the parts on hand if you're in a pinch. I have quite a few o-rings of that size but not silicone, probably one or 2 silicone ones as well.?

Does yours use a bolt and washer, or a big nut and splined washer? Mine is nut and washer, which I have spare. Bolt and lock washer, we can probably source @ a hardware store. Or.... Call Chip @ Munns.
__________________
~Tim

"04625 SXC
'04 625 SMC 76,xxx mi.
'97 CR500 Sold
tdreyer is offline   Reply With Quote