View Single Post
Old 02-19-2013, 08:17 PM   #100
Krasniewski OP
I don't ride much.
 
Krasniewski's Avatar
 
Joined: Feb 2008
Location: LA - Lower Alabama
Oddometer: 1,215
Quote:
Originally Posted by Carter Pewterschmidt View Post
Is that just a stock tank or is that supplied with the Ryca kit? If it's stock just score a used one off of ebay. Looks like they have a bunch and prices start around $80.
The stock tank is modified by Ryca for the kit to allow it to sit lower. Pieces are tigged in and the tank is pressure tested. If I can find a stock tank, I might able to tig in the section I need. I'll have to coat the inside though - you've seen that my tigging isn't up to snuff. Even as is, I'd feel better about the tank being treated and coated. I've had bad experiences with leaky fuel on my KLRE project.

Thanks for the info - I'm off to fleabay right now.

EDIT: You're absolutely right - there's plenty out there as far as stock tanks. I want to cut the portion that needs help out first though, and see if the dents will come out. Perhaps I can fix it enough to tig back in w/o needing another tank. It doesn't look hard, but I've said that before.

Krasniewski screwed with this post 02-19-2013 at 08:34 PM
Krasniewski is offline   Reply With Quote