View Single Post
Old 02-20-2013, 08:04 AM   #74054
Rob.G
Mostly Harmless
 
Rob.G's Avatar
 
Joined: Jan 2010
Location: Fulltiming in an RV!
Oddometer: 2,128
Quote:
Originally Posted by Chill View Post
I enquired about brake upgrades a few weeks ago and got some good advice here. Thanks.

Anyhoo, I sorted them last weekend. Was a bit nervous as I've only ever done new pads before, never fluid or bleeding. I swapped the brake lines for braided Galfer lines, new EBC pads and new fluid. I was looking for a bit more bite to the brakes and they've turned out better than expected. I'm chuffed with the results and chuffed I did it myself, I love working on this bike. Anyway, I know a lot of people only ever do the braided front line but I'm glad I did the rear too. I use it a lot commuting, and the feel is much better now. Managed to strip the phillips head out of one of the front master cylinder screws but drilled it out and put some stainless M4's in there, seems ok, no leaks.
A lot of people strip those screws... they're actually not philips. They're a Japanese "standard" (I forget the exact term)... but if you look closely, they aren't tapered like a true philips.. the slots go all the way down completely. There's a special tool you can get to remove them, but it sounds like you already solved the problem. :)

Rob
__________________
'12 Suzuki V-Strom DL650
'96 Suzuki DR650
'10 Kawasaki KLX351S #320
Rob.G is offline   Reply With Quote