Originally Posted by McVick
On your's, do you see the whit dot just behind the "vent".
This spot lines up nicely with the two nipples coming off the tank on each side, one on each side.
I believe something should go where the white dot is and secure to the metal nipple on the front of the fuel tank.
If I am wrong, does any one know what the metal nipples ar on the front of the fuel tank?
The metal ears on the tank are meant to have rubber grommets in them.
The towers on the fairing that are slightly forward and below the duct have a teardrop shaped end, this pushes into the rubber grommet on the tank to secure the fairing.
The same system is used for the sidepanels to hold them to the frame.