Thread: Drz400 Thread
View Single Post
Old 02-24-2013, 11:00 PM   #18147
DR650SEDDY's Avatar
Joined: May 2007
Location: Phoenix,Az
Oddometer: 4,055
Originally Posted by XJHero View Post
im at a complete loss of where to go now besides digging into the carb or valves, and being as that is just was running,cant see the valves getting out of adjustment from the truck ride. Any advice would be greatly appreciated...
I had similar problem while back. Before i started to dig into the engine/carb repertoire i took off the gas tank cleaned well with soap & water rinse well with water only, let it dry till next day and before reinstall it blow air into it from powerfull compressor. I took few minutes to double check the petcock (remove & inspect). I filled it half way, added carb cleaner to it. It started right up, and idled like new bike. I still have to use the choke to start it no matter what though (cold or hot weather).
DR-Z440E 00 - DR650SE 02.
Je ne suis Jamais a l'aise que lorsque je termine mon parcours, parlant d'Enduro bien sure. "DR650sEDDY".
DR650SEDDY is offline   Reply With Quote