View Single Post
Old 02-25-2013, 09:31 AM   #5589
cbig
Rift- Raft, SCooter Trash
 
cbig's Avatar
 
Joined: Sep 2003
Location: Orange County, CA
Oddometer: 881
Getting the bolt off was not

An issue, I want to be able to put it back on without disassembly. I think all the stuff should stay in place....but no cartridge holding tool. What I'm asking is if the friction from the spring with the forks upside down will hold the cartridge enough to get to the 34 Nm specified?

I took the forks apart Saturday with the air gun, easy. Putting it all back together required a tool I made out of a piece of pipe. If spring tension is all I need, when I go out camping I can screw with the shim removal and not have to mess with pouring back in my already clean oil. I can screw around with the shimming I like. Having an air gun camping will be more trouble than its worth as I wouldn't want to put it on that way and risk stripping it and running the motorhome engine for the air supply is a pain.

Should be a major improvement on rocks? Seems ok now but more is better!
__________________
Cbig

cbig screwed with this post 02-25-2013 at 09:52 AM
cbig is offline   Reply With Quote