View Single Post
Old 02-27-2013, 01:48 AM   #1
gefr OP
Life is a trip
 
gefr's Avatar
 
Joined: Nov 2005
Location: East Med, Greece
Oddometer: 3,790
Base plate for KTM 990 ITG foam air filter.

Aluminum base plate cut with laser for KTM 990 ITG Superflow foam air filter. Matches with ITG JC30/65 and JC30/80 model.

Cost will be 45€, shipping is free.
It can take up to 22 days to reach buyers, though it usually reaches USA in 10 days.

Upper side:


Lower side:


Plates without the breather hole and/or without temp sensor are now available, you just need to ask them specifically.


I can also include blanking plates with another 5€.

DZUS half turn clips and sealing flanges for throttle bodies are included. Sealing flanges should be fitted under the base plate.

Foam filters are not included. You can find a local distributor here:

http://www.itgairfilters.com/megaflow-introduction.asp

gefr screwed with this post 09-16-2014 at 06:27 AM
gefr is offline   Reply With Quote