KTM 620 rebuild/refresh
View Single Post
02-28-2013, 05:34 PM
Joined: Jun 2007
Location: Piikkiö, Finland
Few easy steps and shock is removed...
10) lower the shock about 2 inches until it's free of its bracket on the frame and try to rotate the reservoir ccw about 200 degrees towarts the chain, then tilt the head of the shock about 20 degrees to the left, then take it out through the hole in the swingarm . You might need to lower or raise the rear wheel a little to get enough free play but it will work!. Remember the shock's 'attitude' when sliding it through the hole in the linkage....getting it back in place only works in the same way!!!
Its simply matter of faith and right magical moves...
"The concept of a versatile motorcycle equally at home on dirt and pavement is as old as motorcycling itself"
Seikkailu_R screwed with this post 02-28-2013 at
View Public Profile
Visit Seikkailu_R's homepage!
Find More Posts by Seikkailu_R