+1 However, if you're worried about changing the main over and over, there is a plug on the bottom that allows for access to the main. Mine is a 17mm
You're right, these are the same way. There's a big plug on the bottom of the bowl and you can change both the main and the pilot jet through it. That's going to make this a lot easier.
Skip ahead to minute 5:10. The guy made a float level gauge that I NEED to make.
This is like waiting for Christmas. I've got class next week then Spring Break. Hopefully I'll have all the parts in along with an idea of what jets i need so I can get these sorted out while I have some time off.