Originally Posted by rectangular
Here we are, at the final build day of the KLR650! Let's get right into it…
The left side cam caps are connected with an oil tube. I blew some air through it to clean it out. Some crusty little bits of oil came out. Nice and clean now!
Placing the caps on.
I wanted to make sure to follow the right sequence! Front to back. Front to back.
Now for the individual right side cam caps.
Not to be a debby downer, but that oil feed tube does not look original. Did it have the 2 rubber o-rings at each end? If not, you could have oil supply issues to the cams.
An easy fix before it goes sideways.