View Single Post
Old 03-20-2013, 01:42 PM   #3559
King of all manfu
Colemanfu's Avatar
Joined: Jan 2006
Oddometer: 3,713
Head light on/off project

On my old LC4 I had a switch that would turn the head light on and off, loved it - I wanted to do the same with my 500. 2 reasons so save my bulb, I'm on my 3rd and to be more stealth ha. Total cost = $4.00 for the switch, had the scrap aluminum hanging around.

I made a little box to hold a simple push/pull on/off switch.

We know the stock dash is very tight. I tucked it on the brace for the stalk for the left turn. The lip goes under the stalk and I'll use 2 mini nuts/bolts to hold it in place.

Here is a pix with the mask forward a bit. You can see how it wraps under the turn brace to give support when I pull the switch.

My question to the electrical experts is... what wire should I tap into? The brown on the side or the green or blue on the bottom of the light?
Guns keep society safe.

Colemanfu screwed with this post 03-20-2013 at 02:00 PM
Colemanfu is online now   Reply With Quote