Originally Posted by dirtysouthjacket
Awesome! I think it really depends on the shop you use and how busy they are. Also, make sure they completely understand what you want done. Machining it really doesn't take long at all. Setting up would take half the time of the actual work!
I have found the best way to do it is to take everything apart and bring the following to the machine shop:
1) bring both BMW bottom feet/lug obviously
2) one of the donor fork bottom adjusters
3) one of the donor fork bottom feet/lug
That way they can see how it all goes together and can measure the donor lug set up to match the machining to be done.
Turn around time on the 2 sets I've had done is about 1-2 weeks.