Turn signal flasher...
The stock flasher on my '07 610 broke at the little pins. Doesn't appear to be a very robust design, so I thought I'd replace it with one that has 1/4" spade terminals.
Picked up a generic 2-terminal 12 V flasher at auto parts store, but now the signals come on, but don't flash on/off. I can hear the flasher click once, but that's it.
Is there some special flasher I need to use? I'm not running LEDs, just the stock signal lights. I have the "B" terminal wired to the hot lead (red/green), and the "L" terminal to the load (blue/black).
'11 Gas Gas EC250 | '06 KTM 950 Adv | '79 Laverda 1200