Originally Posted by slickgj
I did a ton of reading and searching and I have a question I didn't find a specific answer to, or maybe I just missed it (sorry). I don't want to beat the FD check to death but:
I am looking at an 02 1150GSA and the FD is solid when checking at 3 and 9, but there is slight play at 6 and 12. Since the play is only noticeable at 6 and 12 would this likely be an indicator of a pivot bearing issue vs the FD drive bearing?
Have someone hold the brake. If you still have play it is your pivot bearings. If not it is your FD bearings.