View Single Post
Old 04-05-2013, 07:15 PM   #7
"Cool" Aid!
JimVonBaden's Avatar
Joined: Feb 2005
Location: Alexandria, VA
Oddometer: 53,912
Originally Posted by simoneau View Post
Remove #10 by installing #12 about 4 or 5 turns only and hammer #12 to drift #10. Use a longer bolt than #12 if required to drift #10 all the way out. Then an appropriately sized socket slightly smaller than #10 and an extension can be use to drive #2 out. Hope this helps.
Good advice.

JimVonBaden is offline   Reply With Quote