If you do lots of stop / start similar to single track riding locate the PC (or Juice) temperature sensor on the outside of the faring (next to the snorkel intake so you don't pick up heat from the radiator.
I have had two riders (one with a 1150 Rt and one with an 1150gs) tell me they used a soldering iron to melt a small hole in the intake and stuck the very end of the sensor in there to get good ambient air temperature (and sealed up with silicone).
Originally Posted by scatto1
Ok so I disconnected did the fig 8 test and was pretty abrupt on/off throttle. Reconnected did the same and was much smoother.
So not sure what changed, but certainly different than yesterday when I was out. Will hit the gravel again tomorrow to confirm findings.