Disabling alarm with key
Mixermsk, With the KTM alarms you get a code card that gives you the alarm disable code. You insert the key and turn on, yes the alarm will sound, count the number of flashes on the led then turn the key off after each code number of flashes have shown. Example, code 1234, turn key on and count 1 flash turn key off. Turn key on and count 2 flashes and turn key off. Do this until you have entered all the code numbers. On the next turn on the bike will run as normal. At least that is how I remember it is done. I have alarms on both of my KTM's. Just have to remember the activation code.