View Single Post
Old 04-18-2013, 03:44 AM   #11
stainlesscycle
Beastly Adventurer
 
stainlesscycle's Avatar
 
Joined: Jun 2008
Location: morgantown, wv
Oddometer: 2,199
Quote:
Originally Posted by clicheche View Post
looks like i don't remove the shaft... duh. just a ring and washer around it? to gain access to the seal?
do not need to remove shaft. if you want to remove shaft, you need to pull clutch cover, remove clutch basket, etc, because selector end of shaft is behind it.

to replace shift shaft seal, just pull the shifter lever off and remove replace seal. i do not believe the later models had the snap ring/washer/rubber boot external to the seal. the early ones did.
__________________
current bikes
07 gasgas xc300-94 duc 900ss-86 morini camel (2)-84 IT200-83 IT175-78 guzzi lm1-77 pursang 250-76 morini 3 1/2 strada-76 frankentaco pursang 200-74 frankentaco pursang 200-74 morini 3 1/2 sport-74 mz ts250/0-74 puch 175 (3)-73 can-am 175tnt-71 guzzi frankeneldo-71 ossa Stiletto-70 frankentaco sherpa s(2)-66 morini corsarino(2)-63 morini corsaro + many more
stainlesscycle is online now   Reply With Quote