Originally Posted by fishheadstew
1) What position is the best slot for the clip to be on the needle?
2) Does anyone know the best amount of turns out that would work the best?
I have no TY knowledge but plenty of two stroke experience.
1) It's a good idea to always start in the middle position and make changes from there if needed.
2) I generally start at 1-1/2 to 1-3/4 turns out on the air screw and adjust from there.
What does the plug look like? Is it white, brown, black and oily, wet with gas, etc. This can help narrow down the issue.
How about the air filter?