New and improved KTM690 WUNDERFEST
View Single Post
04-23-2013, 09:38 AM
Joined: Jul 2004
I got a new speedo from the dealer...in the months it took to do so I fixed my own. The powder comes from the the printed plastic breaking loose of a mounting pin and then chaffing on the lcd. My fix was crude but worked well. I simple took it apart, carefully popped the speedo needle off and cut the plastic window out of the printed piece (the plastic window that sits above the LCD panel). Cleaned all the powdered plastic out and reassembled...put some silicon sealer on the missing pin. It wasn't a perfect fix but it stopped the vibration and the display was readable again.
My intuition nearly makes up for my lack of good judgement.
Just installed my new trolling motor
Husaberg tank for sale:
View Public Profile
Find More Posts by Seth S