Not sure I took any pix but it was not my idea - check out post 135 here:
Autostream (another Aussie) has some good pix there.
Not sure how well the OEM shroud will work with a bigger fan, but anything is worth a try. (Smaller fan...cut some off and or bend it to fit). I am allergic to the sound of boiling fuel and have heat taped my airbox and inside tank surfaces as well.
I know I had to cut mine down some and used a zip tie around the leading edge of it to hold it in place. It took a while and lots of cut zip ties to get it just the right shape to not rub on the tank...much. Not sure how more pix of my install after the fact will help but if I get some garage time tonight I will snap some. PM me an email address if you want them quicker. Like I said its kind of a suck it and see thing and the clearances involved are probably different from one bike to the next. If your not concerned with rubbing off some paint it will probably go easier.