View Single Post
Old 04-25-2013, 07:13 AM   #241
John Smallberries OP
Beastly Adventurer
John Smallberries's Avatar
Joined: Aug 2009
Location: Northville, Michigan
Oddometer: 1,309

Originally Posted by ady-uk View Post
What if one of your items goes wrong or you just simply like upgrading and installing new products as they become available.

You have to chop the wires and resolder a new connection every time.
(sorry but no thank you, no way) I don't like excess wire so a few cuts and the cable is soon going to run out leaving be with a solid lump of resin and no wires left.

Besides every connector on a motorcycle has plugs / sockets.
At 12 volts / low amps, water splashes just don't cause that much of a problem.
My Fuzeblock, I currently use, has got throughly soaked and never caused a problem.
Too much emphasis is put on water and auto electrics. :(

I was trying to get clarification wether my findings were correct.
Have they really removed the plug in style wires.
It seems they have so I wouldn't buy a box that'll rapidly lose its useful lifespan, everytime the wires got cut!#

Sorry I'm really not interested in this anymore.
I was, still would be if it was what I saw in an early brochure (abeilt home programmable) but not now. not with non replacable fixed length wires that you can't affort to cut down or remove till required later and not without the corrosponding earth terminal option.

Shame that a product has moved backwards instead of forwards IMO

These work great for a clean PDM60 install and avoid any wire consumption concerns:
'05 BMW 1200GS '09 Honda CRF230 '10 Yamaha TW200 '07 KTM 400 XCW/EXC '15 Jialing 150 GY2
John Smallberries is offline   Reply With Quote