View Single Post
Old 04-29-2013, 09:14 PM   #3260
Gnarly Adventurer
Joined: Aug 2011
Location: Calgary, AB
Oddometer: 118
Originally Posted by Shibby! View Post
Bottoming out is requiring new springs, not compression dampening.
Not entirely true. This is determined by your static vs race sag. You can have the correct spring and have your compression damping too low and you will bottom out.
I did set my race sag toward the high side but I will decrease my race sag (increase preload) a bit and see if that helps as well as turning up the compression damping.
Although my static sag is a bit too high as well so your conclusion may be right!

Plus I will only be adding weight to the bike for trips so a stronger spring is probably in my future anyway....
Subaru297 is offline   Reply With Quote