View Single Post
Old 04-30-2013, 04:15 PM   #303
sailah OP
Lampin' it
sailah's Avatar
Joined: Aug 2005
Location: Turning expensive metal into scrap
Oddometer: 5,754
I had originally intended to do that with this bike but things got so one off I scrapped the idea. Depending on how the bike turns out I may build another one using different components that don't require a tank rebuild seat pan etc. that I would prototype for others to build using a stock ninja as a base and off the shelf components from ebay.

I wish I had gone that way from the start with this bike but no regrets. Helps me be a better fabricator. Two years ago I had never welded or used a lathe so I've come a long way from those first days of using a sawzall and grinder
We're not out here to rough it. We're here to smooth it. Things are rough enough in town.

sailah is offline   Reply With Quote