I love this idea. I'd love to get two liners with the same concept
, just different measurements: 18.5" x 9" x 6.5".
The 6.5 measurement is the "height" (or distance between the zipped sides) when putting the thing flat down, so zippers around the 18.5 x 9 sides. One green as the main color, one a dark red as the main color with one side being black, just as the bags above.
These would be for F650GS Jesse bags after stuffing an existing liner I have from my Micatech cases into the bottom part to not go completely crazy with the shape (although I'd love to have a form fitting bottom liner in addition to the liners above).
We'll use dry bags / compression bags for the lids of these cases.
Also, I need a hatchet cover
And two liners for 10" Jesse Odyssey lids
(I have the Odyssey for the Triumph Tiger 800). Looking at the bags for the F800GS on the Jesse website the lids look pretty much the same. The measured opening (inside the "lip" of the lid) is: 9.5" x 19.25", I measure an inside height of ~3.5". Can you confirm that these are similar to the F800GS lids?
What other information do you need?