F700GS - shock experiences
Have the 2013 F700GS with Indy kit installed with roller bearings and Íhlins shock. The 2013 plastic side cover is too narrow to allow me to have used the replacement bolt (the head is too fat), so I had to reuse the factory bolt which has a smaller profile head. I did use Igus spacers (I used IGlide M250 model spacers in 26 MM OD, 20 MM ID and cut to length on both sides). Thanks Indy for supporting us!! What do you recommend in terms of a replacement upper shock bolt for a 2013 model to accommodate the lack of clearance for a fat bolt head? Do you suggest I order up a bushing as posted to replace the needle bearing?