View Single Post
Old 05-16-2013, 05:11 AM   #563
Hegelian Scum
kraven's Avatar
Joined: Jul 2005
Location: Asheville NC
Oddometer: 4,958
Originally Posted by motorat View Post
the spedo and the way it mounts are what bugs me.
you cannot put different risers without doing something with the is just in the way.
i'm not a fabricator so i need bolt on stuff.

a set of mini guages like the ones available for the bonnie would be better.
So, just change the bars and forget risers. That's the simplest bolt on solution. The bars are a standard diameter and there are a million permutations to be purchased at about 40-50 bucks a pop.

There are also a number of speedo relocation mounts available to move a speedo from the riser mount. Some later sportster models have this same issue and many opt for the Joker Machine speedo relocation to the upper fork leg, off to the side and out of the way to clean up the steering head area. There's also a half dozen other speedo mounts on the market. Measure the gauge diameter and check the size for which the mount is intended.
So there I was walking into a biker bar in Chattanooga with liberty spikes on my head and a drag queen beside me... - bcurvin

kraven screwed with this post 05-16-2013 at 05:18 AM
kraven is offline   Reply With Quote