Originally Posted by northsouth15
does that bolt up without any modification?
I went riding the other day with a DRZ400sm owner, and we were trying to figure out if that headlight fit
The SM surround required quite a bit of trimming to fit. I had to trim out the bottom 2 corners a bit, and cut the guard that goes around the gauges. I used the SM's bottom mount bolt and had to make some small brackets to move the top two bolt holes. It really took an afternoon to fit. The fender came with a little template. Turns out I stink at measuring anyways so it required some "tweaking" to fit.
The exhaust did obviously
Here's my build thread over on TRS: http://www.therangerstation.com/foru...d.php?t=102122