View Single Post
Old 05-24-2013, 07:11 AM   #587
The Toad OP
Let There Be Light
The Toad's Avatar
Joined: Oct 2007
Location: Location, Location.
Oddometer: 1,183
Originally Posted by ThatGuy View Post
Sorta, red single wire and single switched power wire of a fuseblock. Choices:

-Either cut the red single wire away and rely on the FB's wire only
-Splice red single and FB switched power wire together then into a switched source
- Or both the single red and FB switched power wire are individually spliced into a switched source.

I sounds like #2 is the viable option but I figured I'd ask around.

EDIT: what I did was: took the red switched power wire and connected it to the FB as well. Used the FB's switched power wire and connected it to a switched source. Lights shut down after I turn the bike off.
Thanks for the update.

MondoMotos - LED Auxiliary Light Kits - Tusk Panniers
RoadRUNNER Magazine - Blog
Ride Reports - Four Corners - Amish Country - Costa Rica - Expedition Michigan (or not) - Tellico Plains
The Toad is offline   Reply With Quote